Idiomas disponibles
Idiomas disponibles
Method of Application
1. When using the water heater for the first time or after draining the tank and
then using it again, the tank of the water heater must be filled with water first.
The method is: open the water inlet valve, pull up the handle of the water
mixing valve and turn it clockwise to the high-temperature area, that is, start
injecting water into the inner tank. When the hot water outlet comes out, it
indicates that it is filled with water, then turn the handle of the water mixing
valve counterclockwise to the low-temperature area and push it to the
closed position (as shown in Fig 6).
Close
2. Insert the power plug into the power socket to energize the water heater. At
this time, the indicator light is on.
(1) If the power cord is damaged, it must be replaced by the manufacturer or its
maintenance department or similar professionals in order to avoid danger.
(2) This electric water heater provides emergency protective measures in case
of abnormal grounding system in normal use. It belongs to class I electric
water heater that provides emergency protective measures in case of
abnormal grounding system.
3. Description of Operation
Open
Schematic Diagram of Operation Panel
7
Low Temperature
Zone
Low Temperature
Zone
