Features; Operation Instructions - Urrea LI812 Manual De Usuario Y Garantía

position before making any assembly adjust-
ments, changing accessories, performing any
inspection, maintenance or cleaning proce-
dures. Such preventive safety measures reduce
the risk of starting the tool accidentally.
j) Do not use the Impact Wrench if it has been
damaged, left outdoors in the rain, snow, wet
or damp environments, or immersed in liquid.
k) Maintain labels and nameplates on the Im-
pact Wrench. These carry important information.
WARNING
Remove the plug from socket before carrying
out any installation, adjustment, servicing or
maintenance.
The manual should indicate the content as follow:
1. Stay alert and use common sense when oper-
ating the tool. Do not use the tool when tired
or under influence of drug, alcohol or medicine.
2. Never put fingers on the switch button while
moving the tool to avoid unintentional start-
ing of the tool.
3. Ensure the mounting screws and other as-
semblies are fixed properly and securely before
operate the tool. Turn on the switch and let
the tool work for 30 second in a safe position.
Stop immediately if considerable vibration or
other defects are detected, have it repaired.

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
A. SWITCH B. HANDLE COVER
C. HOUSING D. BRUSH HOLDER CAP
E. REAR COVER F. GEAR BOX
G. SPINDLE H. SLEEVE
E N G L I S H •

OPERATION INSTRUCTIONS

WARNING: Disconnect the power plug
from the AC power source before any assem-
bly, adjustments or adding/removing accesso-
ries. Following this preventative step reduces
the risk of the impact wrench coming on ac-
cidentally and the risk of damage to the work-
piece and injury to the operator.
Make sure the voltage rating on the tool
matches the power supply voltage.
Before attempting to use your tool, familiarize
yourself with all operating features and safety
requirement.
INSTALLING/REMOVING SLEEVE
When installing a sleeve, align the holes in the
side of the sleeve with the dent pin.
Press the sleeve on until the dent pin engages
in the hole.
To remove a sleeve, pull the sleeve off the spindle.
When removing the sleeve or bit from the
tool, avoid contact with skin and use proper
protective gloves when grasping the sleeve,
bit or accessory. Accessories may be hot after
prolonged use.
ROCKER SWITCH AND DIRECTION OF ROTA-
TION
This impact wrench is equipped with a rocker
switch that switches rotation from clockwise to
counter-clockwise easily, allowing fasteners to
be broken loose.
• To rotate the impact wrench in a clockwise
direction, press the lower portion of the rocker
switch.
• To rotate the impact wrench in a counter-
clockwise direction, press the upper portion of
the rocker switch.
WARNING: Do not change the direction
of a moving bit. Make sure the bit comes to a
complete standstill before moving switch.
Changing direction while the bit is moving can
cause damage to the impact wrench.
U se r's m a nua l
9