Tabla de contenido
Idiomas disponibles
Idiomas disponibles
specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
8
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
ANGLE GRINDERS
WARNING: Use only impact sockets. Non-
impact sockets may shatter or break causing
injury and/or damage.
Ensure fastener and system will withstand the
level of torque generated by the tool. Exces-
sive torque may cause breakage and possible
personal injury.
a) Always wear safety goggles or eye protec-
tion when using this tool. Use a dust mask
or respirator for applications which generate
dust.
b) Do not grasp the tool or place your hands
too close to the spinning anvil. Your hand may
be lacerated or may cause injury.
c) Secure the material being worked on. Never
hold it in your hand or across your legs. Unsta-
ble support can cause loss of control and injury.
d) Position yourself to avoid being caught
between the tool or side handle and walls or
posts. Should the socket or bit become bound
in the work, the reaction torque of the tool
could crush your hand or leg.
e) Check to see that keys and adjusting wrench-
es are removed from the Impact Wrench be-
fore switching the tool "ON". Keys or wrench-
es can fly away at high velocity striking you or
a bystander.
f) When using the Impact Wrench, always
maintain a firm grip on the tool with both
hands.
g) Keep the handle of the Impact Wrench dry,
clean, and free from oil and grease.
h) Do not run the Impact Wrench while car-
rying it at your side. A spinning socket or bit
could become entangled with clothing and in-
jury may result.
i) Disconnect the plug from the power supply
and place the switch in the locked or "OFF"
Tabla de contenido
