Idiomas disponibles
Idiomas disponibles
DISMOUNTING THE BIKE
WARNING! Do not dismount the bike or remove your feet from
the pedals until the pedals have stopped completely. You can
stop the flywheel at any time by pushing down on Brake
Handle (No. 16).
ADJUSTING THE HANDLEBAR
26
Loosen the Spring Knob (No. 13) on the Main Frame (No. 1)
to raise or lower the Handlebar (No. 22) to the desired
position. Make sure the Spring Knob (No. 13) settles into the
desired hole and secure it firmly by turning clockwise.
Loosen Triangle Knob (No. 26) to move the Handlebar (No.
22) forward or backward to desired position. Tighten the
Triangle Knob (No. 26) to secure.
22
1
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your
shoe fits snugly in the toe clip cage. Rotate one foot to within
arm's reach and pull the strap until the top clip cage fits your
shoe snugly. Insert the strap back into the hoop of the toe clip.
Repeat this for the other foot.
MOVING THE BIKE
To move the bike, first ensure that the Handlebar (No. 22) is
properly secured. If the Handlebar (No. 22) is loose, tighten
26
the Spring Knob (No. 13) and Triangle Knob (No. 26) to
secure it. Next, stand at the front of the bike so that you're
directly in front of the Handlebar (No. 22). Firmly grasp and
22
hold each side of the Handlebar (No. 22), place one foot on
the Front Stabilizer (No. 2) and tilt the bike towards you until
13
the Transportation Wheels (No. 11) on the Front Stabilizer
11
(No. 2) touch the ground. With the Transportation Wheels
(No. 11) on the ground, you can transport the bike to the
2
desired location with ease.
24
