Idiomas disponibles
Idiomas disponibles
4. Place the tab on the dust bag chamber
cover in the slot on the vacuum cleaner.
Push the dust bag chamber cover into
place until a 'click' is heard.
NOTE:
Make sure the dust bag is locked
into place before pushing the dust bag
chamber cover. The dust bag chamber
cover can't be assembled successfully if
dust bag is missing or not installed into
place.
WARNING
Electrical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the vacuum
cleaner without the foam filter. Be sure
the filter is dry and properly installed to
prevent motor failure and/or electrical
shock.
Clean the foam filter with cold water as
needed.
NOTE:
When the cleaning of filters no
longer restores vacuum cleaner suction
to full power, or the filters are worn or
broken, replace the filters. To purchase
filters, call 1-844-608-3080.
Regularly clean and replace the filters to
keep the vacuum's suction power optimal.
1. Remove the dust bag as outlined in the
DUST BAG REPLACEMENT section (page
18-19).
2. Remove the foam filter cover and the
foam filter.
DUST BAG REPLACEMENT
FOAM FILTER CLEANING
- 19 -
Slot
Tab
Foam Filter Cover
Foam Filter
