Idiomas disponibles
Idiomas disponibles
3.3.5 Timer control
You can use the timer in two different ways:
a)
You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when
the set time is up.
b)
You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99 min.
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not
selecting any cooking zone.
Touch "+" the controls of the timer. The minder
indicator will start flashing and "10" will show
in the timer display.
Set the time by touching the "-" or "+" control
of the timer
Hint: Touch the "-" or "+" control of the timer
once to decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer to
decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer
is cancelled, and the "00" will show in the minute
display.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- -" when the setting time finished.
b) Setting the timer to turn one cooking zone off
Touching the heating zone selection control that you want to
set the timer for. (e.g. zone 3#)
Set one zone
12
