Idiomas disponibles
Idiomas disponibles
Assembly - Attaching the Fan Blades
1
Attaching the blades to
the blade arms
□
Attach a blade (F) to a blade arm (G) by inserting screws
(AA) into the holes in the blade and through the blade arm
(G). Note that the rubber washers are pre-attached to the
blade arm (G).
□
Tighten each screw securely.
□
Repeat these steps for each blade (F) and blade arm (G).
2
Attaching the blade assembly to the fan
□
Attach the blade assembly to the motor assembly (E) by
aligning the screw holes on the blade arm (G) with the screw
holes on the bottom of the fan motor assembly (E).
□
Tighten the pre-installed blade bracket screws.
□
Repeat this step for the remaining blade assemblies.
3
Attaching the bottom plate
□
Screw the bottom plate (H) onto the threaded post (LL) at the
base of the fan until tight.
F
G
11
Please contact 1-855-HD-HAMPTON for further assistance.
AA
G
E
LL
H
HAMPTONBAY.COM
