Assembly - Attaching The Fan Blades - HAMPTON BAY NASSAU 91120 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
6
Mounting the fan-motor assembly
(close-to-ceiling mount)
WARNING: The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
□
Carefully unhook the fan from the mounting bracket (A) and
align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock in place. Immediately tighten
the two mounting screws firmly.
□
Install the two mounting screws (HH) and lock washers (GG)
(saved from Assembly Step 1 "Prepairing for mounting" into
the holes in the canopy (C) and tighten firmly.
□
You may now proceed to attaching the fan blades.

Assembly - Attaching the Fan Blades

1
Attaching the blades
WARNING: Remove the rubber motor stops on the bottom of
the fan before installing the blades or testing the motor.
□
Attach a blade (J) to a blade bracket (I) using the
screws (FF) provided. Please note that the rubber
washers are pre-attached to the blade bracket (I).
Insert a screw into the blade bracket (I). Repeat for
the two remaining screws (FF).
□
Tighten each screw securely.
□
Fasten the blade assembly to the motor by inserting the
alignment post into the slot on the bottom of the motor
and tighten the motor screws. Please note that the
motor screws are pre-attached into the blade arm.
□
Repeat for the remaining blades.
A
C
D
F
FF
J
I
11
Please contact 1-855-HD-HAMPTON for further assistance.
GG
HH
HAMPTONBAY.COM