Assembly - Attaching The Fan Blades And Brackets; Attaching The Blades To The Blade Brackets - HAMPTON BAY 52101 Guía De Uso Y Mantenimiento

Assembly - Attaching the Fan Blades and Brackets

5
Attaching the blades to the blade
brackets
NOTE: Your fan blades are reversible. Select the blade side finish
which best accentuates your decor.
□
Attach a blade (E) to a blade bracket (D) by inserting the blade
attachment screws (AA) into the holes in the blade (E) and
through the blade bracket.
□
Tighten each screw securely.
□
Repeat these steps for each blade (E) and blade bracket (D).
6
Fastening the blade assemblies to
the motor
□
Fasten the blade assembly to the fan-motor assembly (C) by
inserting the alignment post into the slot on the bottom of
the motor and tightening the blade bracket screws. The blade
bracket screws are pre-installed into the blade bracket (D).
□
Repeat this step for the remaining blade assemblies.
Assembly - Attaching the Light Kit Fitter Assembly
7
Attaching the light kit fitter assembly
IMPORTANT: It is critical to attach the light kit using
the quick connector. The fan will not operate unless
the light kit is connected to the fan.
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (KK) on the black bracket below the
fan-motor assembly (C).
□
Connect the wires from the light kit fitter assembly (F) to the
wires from the black bracket below the fan-motor assembly (C)
by connecting the molded adaptor plugs together. Carefully tuck
all wires and splices into the switch cup.
□
Align the three holes in the switch cup of the light kit fitter
assembly (F) with the three holes in the black bracket below
the fan-motor assembly (C). Make sure the notch in the black
bracket below the fan-motor assembly (C) clears the reversing
switch in the switch cup of the light kit fitter assembly (F).
Position the light kit fitter assembly (F) and re-install the three
screws (KK) that were removed in the first step to secure the
light kit fitter assembly (F).
E
D
C
C
F
9
Please contact 1-855-HD-HAMPTON for further assistance.
AA
B
D
KK
HAMPTONBAY.COM