Idiomas disponibles
Idiomas disponibles
LEARNING ABOUT YOUR
10 CUP FOOD PROCESSOR
a
b
c
d
f
e
g
h
i
www.oster.com
4
Food Pusher
a
b
Food Chute Lid
c
Reversible Slice/Shred Disc
d
Disc Stem
Multi-purpose Blade
e
Dough Blade
f
g
Bowl
Base
h
Control panel
i
BEFORE USING YOUR OSTER®
FOOD PROCESSOR
•
When unpacking the product and removing packing material, handle
the chopping blade and slice/shred discs carefully; they are very sharp.
•
Wash all parts except the base in hot, soapy water. These parts can also be
placed in the dishwasher. Be sure to read the Care & Cleaning Section of this
manual to learn the correct methods for taking the unit apart and cleaning.
LEARNING ABOUT YOUR FOOD
PROCESSOR:
Using Your Food Processor
Liquids should be processed at a low speed. Do not operate on high when
liquids are at max fill line.
NOTE: Do not attempt to chop ice in this food processor; it will damage the
bowl and dull the blade. This unit will not whip cream, beat egg whites, grind
coffee beans, spices or other items with high oil content, or slice or shred hard-
cooked eggs, marshmallows, or soft cheeses.
CAUTION: For your protection, this unit has an interlock system. The processor
will not operate unless the bowl is properly locked onto the base, cover is
properly locked onto the bowl. Do not attempt to operate the unit without the
bowl lid, bowl and food chute correctly in
place. Be sure base is on a flat, dry and clean
surface before you begin processing.
1 Turning the food processor ON: Turn on
the appliance by pressing the
ON/OFF button after assembly. The
food processor will not operate unless
completely assembled. You can select
the desired function after the unit is powered on.
2 Using the PULSE control: You can control the texture of processed foods
better by using the PULSE button on your food processor. Simply press and
release to quickly turn the food processor on and off. This allows you to
check processed results and control the consistency. For longer processing,
continue pressing the PULSE button.
3 Using the additional buttons: Add ingredients through the feed tube;
remove the pusher and fill the feed tube as directed (see How to Slice or
Shred). Engage the pusher and press the desired speed. The motor will
start. Press the Pusher firmly down until all ingredients have passed into the
work bowl. Remove the pusher and refill ingredients as needed. Press the
LOW or HIGH button again when finished.
www.oster.com
Figure 1
5
