Warranty Conditions - Extel VisioSmart Instrucciones De Uso E Instalación

• Poor wireless signal, poor
image quality
• The movement detection
function does not work or is
too sensitive
• The application cannot record
video
• Bright spots appear in night
vision mode
• No sound is coming from the
intercom panel
• Image is too bright
Latest version of the downloadable instructions in colour:

WARRANTY CONDITIONS:

The warranty does not cover: consumables (batteries, etc.) and damage caused by misuse, improper use, improper
installation, external intervention, damage due to physical or electrical shocks, dropping, or atmospheric phenom-
ena.
• Do not open the device, as this will void the warranty.
• If the unit is returned for servicing, protect the unit to prevent scratches.
• Clean with a soft cloth only, no solvents. The guarantee is void if parts have been dismantled. Before cleaning it,
disconnect the equipment or switch it off at the mains.
Warning: Do not use any gasoline or carboxylic acid, alcohol or similar treatment. In addition to damaging
your device, the fumes are also hazardous to your health and are explosive.
Do not use any tool that can conduct voltage (wire brush or other sharp tool, etc.) for cleaning.
The till receipt or invoice is your proof of purchase date.
- Wireless devices, such as wireless speakers, can reduce signal strength.
Keep the intercom and mobile device as far as possible from other
wireless devices.
Marks or dust on the camera lens can lower the image quality. Clean the
camera lens with a cloth designed for cleaning camera lenses.
- Maker sure the movement detection function has been activated.
- In movement detection mode, an object must enter the camera's field of
vision in order to trigger movement detection and recording.
- Make sure the micro SD card has been properly inserted and is not write-
protected.
- Make sure the movement detection function has been activated.
- Format the micro SD card during first use
- Make sure the memory card used is class 10
The camera's infra-red LEDs produce invisible light that can reflect off
certain surfaces, such as glass.
- Check that the intercom panel's microphone hole is not obstructed by an
insect.
- Do not expose the camera lens to direct sunlight or to a reflective sur-
face.
- Check the settings
If necessary, consult our technical site: www.cfi-extel.com
0 892 350 069
This product is guaranteed for parts and labour in our workshops.
CFI EXTEL - VISIOSMART - 09/2017
Service 0,35 € / min
+ prix appel
www.cfi-extel.com
GB10