Extel VisioSmart Instrucciones De Uso E Instalación página 53

B. Remove the cover on the back of the intercom panel (held by three screws).
C. If you wish to make recordings (passage, movement detection) you must insert an SD card. To do so, slide the
micro SD card cover up and lift it.
Insert the micro SD card, close the cover and slide it down.
D. Connect the power cable to the back of the intercom panel (the red wire in V+ and the black wire in V-), then
connect it to the mains. Wait for initialisation to fi nish (approximately 2 minutes)
Note:
Push the orange levers to correctly introduce the wires.
E. Download and install the OMGuard HD application from the App Store/Google play.
F. In the WiFi settings on your smartphone or tablet, select the HD-xxxxxx network.
Enter the default password 12345678 and save the settings
CFI EXTEL - VISIOSMART - 09/2017
GB4