Idiomas disponibles
Idiomas disponibles
Stand by:
To set the combination "MP3 player / FM radio / Bluetooth receiver" to the standby mode
and to switch it on again, either use the button (26)
on the remote control or keep the
button MODE (21) at the unit pressed for more than a second. After switch-on, the mode
"Player" will be active.
Selecting the operating mode
Use the button MODE (21) to switch over between the operating modes:
"Player"Ò"Bluetooth" Ò"Radio"O
When two storage media are connected in the mode "Player": The first press of the button
MODE will switch to the storage medium currently not selected; the next press of the button
will switch to the mode "Bluetooth".
Adjusting the basic volume / Muting
x
y
To adjust the basic volume (adjustment range 00 to 31), use the buttons
and
(28) on the
remote control or keep the button
or
(24) at the unit pressed.
To mute the sound, press the button (27); MUTE will appear on the display. To unmute the
sound, press the button again.
Note: When the mute function is activated, it will be deactivated after the next switch-on or
when the operating mode is changed
Operating mode "Player"
The player can be used to reproduce MP3 files from SD / SDHC memory cards and USB
storage media (USB flash drive or USB hard disk with separate power supply). The
reproduction of WMA files and WAV files is also supported.
– Connect a USB storage medium to the USB port (17).
– Insert a memory card (FAT16 / FAT32, 32 GB max.), notched corner facing to the right and
towards the unit, into the card slot (18) until it engages. To remove the card, push the card
into the slot until it disengages.
Note: Due to the large number of storage device manufacturers and device drivers, it cannot
be guaranteed that all storage media are compatible with the player.
Selecting the storage medium:
Once a storage medium is connected, it will be selected and reproduced (even when the
mode "Bluetooth" or "Radio" has been activated). If two media are connected in the mode
"Player" and the medium selected is then removed, the player will automatically switch to
the medium still connected. To switch over between the media, the button MODE (21) can
also be used.
The display will show:
– U for USB medium, S for memory card the letter is preceded by the respective symbol for
replay, pause or stop
– the time already played of the title
– the replay mode (ALL, FOLDER, SINGLE or RANDOM): see below
– the number of the title and the file name
6
