CORBERO CCHF1072NAIRFRY Guía De Usuario página 128

Grounding cable = E →Green - Yellow
Neutral cable = N → Blue
Phase cable = L → Brown
Installing Below Counter
(Figure 2)
• The cabinet should be in compliance
with the dimensions mentioned in
figure 2.
• You need to unload the rear
compartment of the cabinet in the
dimensions mentioned in figure 2 for
necessary ventilation.
Installing Into A Tall Cabinet
(Figure 3)
• The cabinet should be in compliance
with the dimensions mentioned in
figure 3.
• You need to unload the rear
compartment of the cabinet in the
dimensions mentioned in the figure
for necessary ventilation.
• Moreover, if there is a back panel
in the tall cabinet, it should also be
removed.
Ventilation
(Figure 4)
In order for you to get better efficiency
from your oven, there
24
N E
L
should be adequate cold air intake.
Leave suitable spaces according to the
dimensions mentioned in Figure 4.
Installing On The Corner
(Figure 5)
• The installation should be in
compliance with the specified
dimensions to perform the installation
mentioned in Figure 5 and to be able
to open the appliance door.
Fixing The Appliance
(Figure 6)
• Center the appliance and push it
completely into the furniture.
• Power cable should not be bent
under the oven and between the
oven and the furniture.
• Open the appliance door.
• Fix the appliance with the screws
provided along with it.
• Screw the appliance into the holes,
which are shown in figure 6.
• Make sure that the oven is fixed.
Otherwise, there is a risk of tilting
during use.