Important Warnings - CORBERO CCHF1072NAIRFRY Guía De Usuario

Important Warnings

Check the suitability of the electrical
wiring to make the appliance ready
for use. If it is not suitable, call a
plumber and have him make the
required arrangements. You shall use
the appliance safely when you install
the appliance as described in the
installation manual. The person, who
installs the appliance, is responsible
for the malfunctions occurred due to
incorrect installation.
⚠The customer is responsible
for preparing the place where the
appliance would be put and the
electrical wiring.
⚠ Our manufacturing company is not
responsible for the problems that may
occur due to the operations performed
by the people other than the authorized
ones and the warranty shall be deemed
as invalid.
• Carry the appliance together with at
least two people. Lift the appliance
while carrying so it does not damage
the floor.
Electricity Connection and Safety
⚠ Power grid should be disconnected
during installation. Do not turn it on until
the installation ends.
• The appliance should be installed
correctly by the authorized service
technician in accordance with the
specified instructions.
• Do not pass the connection cables
over the hot surface. When the cables
melt, they may cause a short circuit or
a fire.
• If the cables are damaged,they should
be replaced by an electrician.
• They should be plugged into a
(grounded) outlet in the grounding
system in accordance with the rules.
• The appliance should be checked
after its package is opened. In
case of a damage, it should not be
installed.
• The components may be sharp, wear
protective gloves during installation
• The appliance should be installed in
accordance with the rules related to
the electricity and gas mentioned in
the local standards.
• The dimensions mentioned in the
image, are in mm.
• Kitchen cabinets should be on the
same level with the appliance and
fixed.
• Do not mount the appliance in a
decoration or closed furniture. It is
dangerous due to overheating.
• The furniture, where the installation
would be applied, (min. 100ºC)
should be made of durable material.
• It is not recommended to install the
appliance close to the cooler. The
performance of these appliances
should be impacted negatively due to
the heat.
If there is not a suitable outlet,
call the electrician and have your
electrical wiring checked.
• Make sure that your plug is
grounded.
• The company is not responsible
for the damages incurred by the
ungrounded outlets where the
appliance is plugged in.
• If the product has a cable and a
plug; an electrical connection is
established by plugging the appliance
in a grounded outlet.
• If the product has a cable but not a
plug; coding should be performed by
an expert suitably.
23