Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
RESET FOLDING RAIL JOINT
gap
M5 button
head screw
folding rail
jack screw
piece of spare
gear rack
©Bruno Independent Living Aids, Inc.
1. Confirm factory-set gear rack gap (slight
2. Loosen folding rail jack screw after jack
3. Loosen M5 button head screw securing
4. Use a piece of spare gear rack to cover
5. Slowly tighten folding rail jack screw until
Fig. 1
6. Tighten M5 button head screw to secure
Fig. 2
Fig. 3
42
®
space between main rail and folding rail
gear racks) is at folding joint (Fig. 1).
screw in top endplate has been tightened.
folding rail rack (Fig. 2).
joint between main rail and folding rail
(Fig. 3). This ensures pitch is maintained
for safe travel of drive gear across joint.
loose gear rack piece falls away.
top piece of short folding rail.
NOTE: NEVER remove main rail screw
from rail! Carriage and
gear rack segments will fall .
SRE-3000 INSTALLATION 02-08-2019
