Idiomas disponibles
Idiomas disponibles
INSTALLATION
COMPLETING RAIL INSTALLATION (continued)
jack screw
©Bruno Independent Living Aids, Inc.
5. Insert jack screw.
Distance from last full gear
rack segment to end of rail
½"(12mm) or less
½" (12mm) to 1 1/4" (32mm)
24
®
Two (2) M6 socket button head cap screws
(i.e., jack screws) are provided for
pressure-loading the gear rack. One is
25 mm long and one is 40 mm long.
Use table below to determine which
screw to use.
M6 x 25 mm
screw
X
Jack screw may be inserted into either
top or bottom endplate.
NOTE: Do NOT overtighten!
Finger tighten screw until
screw contacts gear rack .
Then, use hex wrench to tighten
no more than one complete turn .
NOTE: Jack screw will NOT be flush
with endplate .
SRE-3000 INSTALLATION 02-08-2019
M6 x 40mm
screw
X
