Idiomas disponibles
Idiomas disponibles
INSTALLATION
CUSTOMER EDUCATION
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
©Bruno Independent Living Aids, Inc.
1. Inform customer of location of Operator's
2. Mount Call/Send Transmitter with
• Discuss bracket location with customer
• Position bracket on wall. Mark top and
• Drill a pilot hole slightly smaller than
• Gently pound anchors into wall with rubber
• Position bracket on wall so top/bottom
• Secure bracket to wall using screws
• Slide transmitter into bracket (Fig. 4).
• Optional: Install additional screw provided
3. Test call/send transmitters.
• Use rocker switch on seat armrest to run
• Check for smooth operation and travel.
• Use remote call/send transmitter to run
• Repeat Step 3 with second transmitter.
• Check for smooth operation and travel.
34
®
Manual. Encourage them to become famil-
iar with the contents.
OPTIONAL TMR-00005 kit:
before mounting to wall.
bottom bracket holes (Fig. 1).
anchors provided.
mallet.
bracket holes align with anchors (Fig. 2).
provided (Fig. 3).
to prevent removal of transmitter from
bracket (Fig. 5).
unit up and down the rail.
NOTE: Unit should travel noticeably
faster going up than down .
unit up and down rail.
SRE-3000 INSTALLATION 02-08-2019
