Idiomas disponibles
Idiomas disponibles
24
ENGLISH
Radiated RF EM
3V/m or 10 V/m
fields
80MHz-2.7 Ghz
IEC 61000-4-3
80%AM at 1kHz
Conducted
3 V in 0.15 MHz- 80
disturbances
MHz
Induced by RF fields
6 V in ISM and/or
IEC 61000-4-6
amateur radio bands
between 0.15 MHz
and 80 MHz 80 %
AM at 1kHz
3V/m or 10 V/m
Portable and mobile RF communications
80MHz-2.7 Ghz
equipment should be used no closer to any
80%AM at 1kHz
part of the device, including cables, than
the recommended separation distance
calculated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance 80Mhz
to 800 MHz 800 MHz to 2.7 Ghz where
P is the maximum output power rating
of the transmitter in watts (W) according
to the transmitter manufacturer and d is
the recommended separation distance
in metres (m). Field strengths from fixed
RF transmitters, as determined by an
electromagnetic site survey, a should be
less than the compliance level in each
frequency range. Interference may occur
in the vicinity of equipment marked with
the following symbol:
3 V in 0.15 MHz-
Portable and mobile RF communications
80 MHz
equipment should be used no closer to
6 V in ISM and/
any part of the device, including cables,
or amateur radio
than the recommended separation
bands between 0.15
distance calculated from the equation
MHz and 80 MHz
applicable to the frequency of the
80 % AM at 1kH
transmitter. Recommended seperation
distance 80 MHz to 800 MHz 800 MHz
to 2.7 Ghz where P is the maximum
output power rating of the transmitter in
watts (W) according to the transm- itter
manufacturer and d is the recommended
separation distance in
metres (m). Field strengths from fixed
RF transmitters, as determined by an
electromagnetic site survey, a should be
less than the compliance level in each
frequency range. Interference may occur
in the vicinity of equipment marked with
the following symbol:
