Idiomas disponibles
Idiomas disponibles
16
ENGLISH
12.11 Low battery indicator
The unit will broadcast "Low Battery" when battery life is depleting and unable to inflate cuff for testing.
The "
" appears simultaneously for approximately 5 seconds prior to shutting off. Replace batteries
at this time. No memory loss will occur throughout this process.
12.12 Static pressure measurement
In the power down state, press and hold the " START/STOP" button, and theninstall the batteries. Until
the LCD screen is full, release the " START/STOP" button.
When the LCD screen displays the double zero, the bloodpressure meter is in static state.
Software version is displayed:10 is a software version in the figure.
DM590
DM591
DM592S/DM592P
Note: Only Service personnel can have access to this mode.
13. SYSTEM SETTINGS DM590
With power off, press "SET" button to activate System Settings. The Memory Group icon flashes.
13.1 Select memory group
While in the System Setting mode, you may accumulate test results into 2 different groups. This allows
multiple users to save individual test results (up to 150 memories per group.) Press "MEM "button to
choose a group setting. Test results will automatically store in each selected group.
13.2 Date/Time setting
Press the SET button to set the Time/Date mode press the 'MEM' button to change the current datum.
Press the SET button to confirm the current datum. Continue setting date, hour and minute as
described. Press the SET button to confirm the selection and continue in succession (month, day, hour,
minute, 12/24 hour).
