Idiomas disponibles
Idiomas disponibles
15
ENGLISH
12.6.1 Cuff loose indicator
When starting the measurement, "
"will be displayed when the cuff is properly wound.
When the cuff is too loose,"
"will be displayed. At this time, please wear the cuff correctly and start
measuring again.
12.7 Power off
The " START/STOP " button can be pressed to turn off the unit in any mode. The unit can turn off the
power itself about 3 minutes no operation in any mode.
Safety Precaution: If pressure in arm cuff becomes too extreme while testing, press the " START/STOP "
button to turn power off. The cuff pressure will rapidly dissipate once the unit is off.
12.8 Last 3 tests average
With the power off, press the " MEM " button to activate the screen. After self-diagnosis, the screen will
display the average of the last 3 readings of the last group used. The " AVG " symbol will appear together
with the corresponding WHO/WHO classification indicator.
To check the average results of other groups, select the desired group before activating the " MEM "
button. (see "Select memory group")
DM590
DM591
DM592S/DM592P
12.9 Memory check
You may check past test results by using the "MEM" button. The most recent test result and oldest test
result in memory can be viewed by pressing and holding the "MEM" button. Upon activating test results.
you can press the "MEM" button to scroll through all test results stored in memory. To check the average
results from other groups, please select desired group first.
DM590
DM591
DM592S/DM592P
12.10 Memory deletion
Memory for a selected group may be deleted while in Memory Check mode. Press and hold " SET " ("
", "Group1/Group2") button for approximately 3 seconds to delete all memory records from the
selected group with voice broadcast "Memory Clear" and then transfer into testing mode. Press the
"START/STOP " button to turn the unit off.
Note: Memory cannot be recovered once it has been deleted.
