WAGNER CONTROL PRO 250 M Traduccion Del Manual De Instrucciones Originale página 32

DE EN
Maintenance and repairs
Before carrying out any work on the device, relieve the pressure and unplug the power plug from the socket.
Danger
a) Cleaning the inlet valve
If any problems occur when the paint is sucked up, the intake valve needs to be cleaned or replaced. Problems can
i
be avoided by cleaning and servicing the device properly.
1. Detach the suction hose from the basic unit.
2. Remove the inlet valve (Fig. 25, 1) from the base unit using a wrench (20 or Allen wrench 10mm).
3. Remove the valve seat (Fig. 25, 2), ball (3), O-ring (4) and spring (5) from the inlet valve. 4. Clean the inlet valve mount and all components thoroughly with a suitable cleaning solution or replace them if necessary.
5. Lubricate the O-ring (Fig. 25, 6) on the inlet valve.
6. Replace the valve seat (fig. 25, 2), ball (3), O-ring (4) and spring (5) in the inlet valve.
7. Replace inlet valve assembly by screwing it into the sprayer.
b) Cleaning the outlet valve
If the spray pattern is poor, the outlet valve may need to be cleaned or replaced.
i
Problems can be avoided by cleaning and servicing the device properly.
1. Remove the high-pressure hose from the base unit using a wrench (17).
2. Loosen the screw (Allen wrench 2.5 mm) on the outlet valve (Fig. 26), but do not remove it.
3. Remove the outlet valve (Fig. 27, 1) from the base unit using a wrench (16).
4. Clean the outlet valve mount and the outlet valve thoroughly with a suitable cleaning solution or replace the outlet valve if
necessary.
5. Put the new or cleaned outlet valve back in.
6. Re-tighten the screw (Fig. 26).
Securely tighten the screw to ensure grounding of the hose and gun.
Danger
Pos. Description
1 Spray gun assembly (incl. nozzle holder)*
2 Nozzle 517 (for thick materials, e.g. interior wall paints)*
Nozzle 311 (for thin materials, e.g. lacquers
3 Nozzle holder
4 Sealing set*
5 HEA Filter Set (incl. filter red and filter white)
6 Filter, red (nozzle 311, 2 pack)*
Filter, white (nozzle 517/619, 2 pack)*
7 High-pressure hose, 9 m *
8 Carry handle
9 Door (black, 1 pc.)
Door (yellow, 1 pc.)
10 Suction hose and Return line*
11 Clip (suction hose)
12 Clip (return line)
13 Return line*
14 Clip (1 pc.)
15 Filter housing
16 Filter *
26
Spare Parts List (Fig. 28)
lacquers)*
Control Pro 250 M / 275 M
Order No.
0517100
0517517
0517311
0517200
0517900
0517202
0418711
0418713
0580050
0580175A
0580041B
0580041Y
0580159A
9890222
0327226
0580487A
0512390
0580154
0580155