poolstar SPAWER POOLEX O'SPA Manual De Instalación página 123

página de 192

/ 192

Idiomas disponibles

4.12

Advanced settings

WARNING: This operation is used to assist servicing and future repairs.

The default settings should only be modified by an experienced professional person.

The system's settings can be checked and adjusted via the remote control by following

these steps

Caution, some settings cannot be modified, check the settings table for more information.

Step 1: Switch off the heat pump.

Step 2: Keep pressing

Step 3: Select the desired setting using the down and up arrows

Step 4: Press on

to select the setting to be adjusted.

Step 5: Press on

to save the new value.

Parameters

Indication

Setting inlet water temp in heating mode

Water temp difference for restart in heating mode

Auto restart(0-without, 1-with)

Protection setting for too high discharge temp

Max. inlet water setting temp in heating mode

Min. inlet water setting temp in heating mode

Difference water temp to stop in heating mode

Setting inlet water temp in cooling mode

Water temp difference for restart in heating mode

Difference water temp to stop in cooling mode

C10

Max. inlet water setting temp in cooling mode

C11

Min. inlet water setting temp in cooling mode

C12

Protection setting for too low ambient temp

C13

Protection setting for too high ambient temp

C14

Protection temp difference for ambient temp

C26

AUX turn On ambient temp in heater Auto mode

C27

AUX water temp difference for restart in heater Auto mode

C28

AUX water temp difference for restart in Manual mode

C29

Setting inlet water temp in Auto mode

C30

PUMP parameter

C31

PUMP working interval of time

C32

AUX parameter

Defrosting mode activation timer

Defrosting mode max. duration

Defrosting exit coil temp

Defrosting entry coil temp

Temp difference between defrosting entry ambient temp

and coil temp

Min. Ambient temp to entry defrosting

CN6 function selection

When OFF, pressing on

4. Use

for 3 seconds to access the settings.

for 5 seconds resets the settings to factory settings.

Default

Adjustment range

15°C~40°C

38°C

1°C~10°C

3°C

0~1

30°C~120°C

110°C

30°C~60°C

40°C

5°C~30°C

15°C

0°C~18°C

7°C~30°C

26°C

0°C~18°C

3°C

0°C~18°C

20°C~35°C

30°C

2°C~18°C

7°C

-25-20°C

-7°C*

35-60°C

42°C

1-10°C

1°C

0°C ~ 20°C

1~5°C

7°C~40°C

38°C

0 (deactivated)

/1 (activated)

30-90 min

60 min

0 (deactivated)

/1 (activated)

1~240min

45 min

1~25min

8 min

1~25°C

12°C

-20~20°C

-1°C

0~15°C

5°C

0~20°C

20°C

0 : no function

1 : high pressure

switch (reserved)

2 : water flow switch

(reserved)

3 : in.grip function

Comments

adjustable

| 25

poolstar SPAWER POOLEX O'SPA Manual De Instalación página 123

Idiomas disponibles

Manuales relacionados para poolstar SPAWER POOLEX O'SPA

Productos relacionados para poolstar SPAWER POOLEX O'SPA