poolstar SPAWER POOLEX O'SPA Manual De Instalación página 122

4.11 Status values
The system's settings can be checked and adjusted via the remote control by following
these steps
Step 1: Press on
Step 2: Pres on and
Step 3: Press on
Parameters table
Parameters
D0 Ambient temperature
D1 Inlet water temperature
D2 Outlet water temperature
D3 Coil temperature
D4 Compressor
D5 Ventilator
D6 4-way valve
D7 High pressure protection
D8 Low pressure protection
D9 Flow sensor
24 | EN
4. Use
until you enter the settings verification mode.
to see the parameters.
to select the setting to be viewed.
Indication Adjustment range
-20°C- 80°C Measured value
-20°C- 80°C Measured value
-20°C- 140°C Measured value
-20°C- 80°C Measured value
ON/OF Measured value
ON/OF Measured value
ON/OF Measured value
--
ON/OF Measured value
--
Comments