poolstar SPAWER POOLEX O'SPA Manual De Instalación página 119

4.9 Pairing the heat pump
Step 1: Now start the pairing.
Choose your home WiFi network, enter the WiFi password and press
"Confirm".
WARNING: The «Smart Life» application only supports 2.4Ghz
WiFi networks.
If your WiFi network uses the 5GHz frequency, go to the interface
of your home WiFi network to create a second 2.4GHz WiFi net-
work (available for most Internet boxes, routers and WiFi access
points).
Step 2: Activate the pairing mode on your heat pump according to the
following procedure:
The procedure depends on the model of your control panel:
The pairing is successful, the "WiFi" logo remains fixed, you can rename your Poolex heat pump
then press "Done".
Congratulations, your heat pump can now be controlled from your smartphone.
4. Use
With the heat pump on, press on
5 seconds to start the WiFi pairing. The
WiFi logo flashes.
for
EN | 21