poolstar SPAWER POOLEX O'SPA Manual De Instalación página 100

! !
PLEASE READ CAREFULLY
These installation instructions form an integral part of the product.
They must be provided to the installer and kept in a safe place by the user.
If you lose this manual, please visit our website:
www.poolex.fr
The indications and warnings contained in this manual should be carefully read and understood
as they provide important information regarding the safe handling and operation of the heat pump.
Keep this manual handy for future reference.
Installation must be performed by a qualified professional in accordance with regulations in force
and the manufacturer's instructions. Errors made during installation can cause physical injuries to
people and animals, as well as mechanical damage for which the manufacturer shall not be held
liable.
After unpacking the heat pump, please check the contents for any signs of damage.
Before plugging in the heat pump, ensure that the instructions provided in this manual are
compatible with the actual installation conditions and do no exceed the maximum authorised limits
for the product in question.
In the event of a defect and/or malfunction of the heat pump, electrical power must be shut off and
no attempts to repair the fault should be made.
Repairs must be carried out by an authorised technician using original spare parts. Non-compli-
ance with the aforementioned clauses can negatively impact the safe operation of the heat pump.
In order to guarantee the efficiency and ensure the proper functioning of the heat pump, it must be
regularly maintained in accordance with the instructions provided.
In the event the heat pump is sold or transferred to a third party, please ensure that all technical
documentation is given to the new owner alongside the equipment.
This heat pump has been designed to only heat the water of a swimming pool. Any other use is
considered inappropriate, incorrect and potentially dangerous.
All contractual and extra-contractual liability on the part of the manufacturer / distributor shall be
considered null and void in the event of damage caused by errors in installation or operation, or
due to non-compliance with the instructions provided in this manual, or the standards in force for
the installation of equipment discussed in this document.
2 | EN