poolstar SPAWER POOLEX O'SPA Manual De Instalación página 112

4.1 Control panel
"ON/OFF" button
"Mode" button
Automatic mode
4.2 Heating / Cooling / Automatic mode
Before use, ensure that the filtration pump is working and that water is circulating
through the heat pump.
Prior to setting your required temperature, you must first select an operating mode for your
remote.
14 | EN
4. Use
Heating mode
Cooling
mode
Heating mode
Select the heating mode if you want to heat up the tub
water with the heat pump.
Cooling mode
Select the cooling mode if you want to heat up the tub
water with the heat pump.
Automatic mode
Select the automatic mode if you want to let the heat
pump switch to the correct mode in a smart way
according to the target temperature.
WiFi indicator
"High" button
"Low" button
Circulation pump
indicator
Heater pilot indicator (RECH
indicator)