Atlas Copco LLA1000-U-EX Instrucciones Del Producto página 23

LLA1000-U-EX
6. Run the chain through the control yoke. Secure the end link with the screw
and washer, without twisting the chain.
7. Pull the chain through the hook using the wire.
Make sure that the standing links have the weld facing inwards from
the centre of the chain wheel and that the chain is not twisted.
8. Fasten the chain end to the hoist. Insert the pin through the end link of the
chain. Lock the pin with the locking pin.
9. Check that the chain runs correctly.
Illustration 1: LLA5000
Illustration 2: LLA980 and LLA1000
EN
© Atlas Copco Industrial Technique AB - 9839 0861 00
Service
23