Idiomas disponibles
Idiomas disponibles
Note:
•
The live music stream may be interrupted by obstacles located between the device
and the soundbar, e.g. a wall, the metal casing of the device, or other nearby devices
operating on the same frequency.
•
If you want to connect your soundbar to another Bluetooth device, press and hold the
BT/PAIR on the remote control to disconnect the previously connected Bluetooth device.
AUX / OPTICAL / TV audio operation
•
Make sure the unit is connected to the TV or audio device.
•
Press the Source button several times on the unit or press the Aux, Optical and TV
buttons on the remote control to choose the required mode.
•
Adjust the playback functions directly on your audio device.
•
Press the VOL+/– buttons to adjust the volume to the required level.
Note:
•
In OPTICAL or TV mode, if there is no audio output from the unit and the status light is
flashing, you may need to enable the PCM or Dolby Digital Signal output on your source
device (TV, DVD or Blu-ray player).
USB charging
•
This soundbar has a USB charging port with a 5V, 1A output current.
Warning about batteries:
This product contains one or more batteries.
•
Use batteries correctly to prevent any injury or fire caused by a leak, overheating,
explosion, erosion or other damage.
•
Keep new and used batteries out of the reach of children or any vulnerable person. Stop
using the product if the battery compartment does not close properly.
•
If the liquid from an alkaline battery comes into contact with the skin and/or eyes, rinse
immediately with fresh water and consult a physician.
•
If an alkaline battery leaks, wipe up the liquid with a cloth and replace the battery with a
new one.
•
Do not swallow the battery/ies. If swallowed, a battery can cause severe internal burns
in 2 hours and can cause death. If batteries are swallowed, contact a poison centre
immediately and consult a physician.
•
Use AA Ni-MH, alkaline or lithium batteries.
•
Do not charge these batteries. Charging non-rechargeable batteries causes gas and/or
heat emissions that can cause explosions and/or fires.
•
Do not use different types of battery or a mixture or new and old batteries at the same
time.
•
Insert the batteries according to the correct polarity (+ and -).
•
Do not put the same battery poles in contact with each other.
•
Remove dead batteries quickly. There is a risk of the battery exploding if this is not
replaced correctly or if the appliance is not used for a period of time.
•
Replace the battery with an identical or equivalent model.
•
The batteries (or battery pack) must not be exposed to excessive heat, such as sunlight,
fire, etc.
•
Do not heat batteries and do not dispose of them in fire or water.
- EN 24 -
