THOMSON SB600BTS Manual De Instrucciones página 20

Note:
The batteries must be inserted correctly to avoid damaging the remote control. Always
remove the batteries when the remote control is not in use for a prolonged period, as
they may leak and damage the remote control.
If you have to bring the remote control closer to the unit to make it work, it means that
the batteries are low. In this case, replace the batteries
Connection
Place the unit in the required location and unwind the power cable.
Connect to the TV AUDIO jack
The soundbar works in TV Audio with the TV audio return channel (TV Audio). If your TV
is compatible with the audio return channel, you can hear TV audio through the soundbar
using a single TV audio cable.
Equipment needed: An audio source with a TV audio output and a TV audio cable (included)
1 Using a high-speed TV audio cable, connect the TV audio from the soundbar to the TV
audio connector on the TV.
• The connector on the TV may be labelled differently. For more information, consult the
TV's user manual.
2 Turn on the television on your TV and the soundbar will synchronise operations. For
more information, consult the TV's user manual.
- EN 20 -