hillvert HT-RTT-650 Manual De Instrucciones página 44

 Move the choke lever to the CLOSED position:
 Move the throttle control lever slightly forward to about ¼ of the way (slightly toward the fast position):
 Pull the recoil starter until the engine starts. Return the recoil to the home position after each pull. Repeat the steps
as needed. Once engine has started, set the throttle to the FAST position before you operate the unit.
Rapid retraction of the starter cord (kickback) will pull your hand and arm toward the engine faster than you can let go.
Broken bones, fractures, bruises, or sprains could result.
3.4.4. Tine Operation - Shift Lever
 Always release drive control bar before moving shift lever into another position.
 Tine movement is achieved by moving shift lever to either the counter rotating till position (
rotating till position (
3.4.5. Forward - Wheels Only/Tines Stopped
 Release drive control bar and move shift lever indicator to "F" (forward) position. Engage drive control bar and tiller
will move forward.
If the engine is hot, closing the choke is not necessary.
1 – throttle control lever
) and engaging drive control bar.
) or the forward