hillvert HT-RTT-650 Manual De Instrucciones página 40

3.3. Device use
3.3.1. Shift Lever
The shift lever has 5 positions: 3 for transport only (no tine rotation) and 2 for operating the tines in forward (F) or reverse (R):
 Moving the shift lever to the far left "F" position will cause the tines to rotate clockwise (
the drive control bar. This position is for tilling soft ground or pre-tilled soil.
 Moving the shift lever to the far left "R" position will cause the tines to rotate counter-clockwise (
engage the drive control bar. This position is for tilling hard ground.
 FORWARD (F) - Move the shift lever indicator to "F" position. Engage the drive control bar and tiller will move
forward.
 REVERSE (R) - Move the shift lever indicator to "R" position. Engage the drive control bar and tiller will move
backward.
 NEUTRAL (N) - Release the control bar to stop movement, then move the shift lever indicator to "N" position.
1 – Recoil starter handle
2 – Throttle control
3 – Choke control
4 –Fuel shut-off valve
) when you engage
) when you