Ryobi RY36LMX51A Traducción De Las Instrucciones Originales página 7

■ Turn off the product, and remove the isolator
key and the battery pack. Make sure that all
moving parts have come to a complete stop
before any cleaning or maintenance task.
■ Replace worn or damaged parts for safety.
■ Frequently check the grass catcher for wear
or deterioration.
■ Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition.
■ Be careful during adjustment of the product
to prevent entrapment of the fingers
between moving blades and fixed parts of the product.
■ When servicing the blades, be aware that
even though the power source is turned off,
the blades can still be moved.
■ You may make adjustments and repairs
described in this manual. For other repairs,
have the product serviced by an authorised
service centre only.
■ After each use, clean the plastic parts with
a soft, dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorised service centre.
■ The blade on the product is sharp. Use
extreme caution, and wear heavy-duty
gloves when fitting, replacing, cleaning, or
checking bolt security.
■ The blade bolts must be adequately
tightened. See
recommendations for blade bolt torque,
which can be found in the product
specification table in this manual.
CLEARING BLOCKAGES
■ Turn off the product, and remove the isolator
key and the battery pack. Make sure that all
moving parts have come to a complete stop.
■ Always wear heavy-duty gloves when
checking or clearing a blockage. The blades
are sharp, and the blockage itself could be
a sharp object.
■ Remove the grass catcher. Check and carefully
clear the grass catcher for obstructions.
■ Check the grass discharge chute, and
carefully clear blockages.
■ Turn the product on its side. Check its
underside and the area around the blade.
Carefully remove any blockages. Remember
that the blade may move during cleaning.
the manufacturer's
KNOW YOUR PRODUCT
See page 183.
1. Cruise control switch
2. On/Off bail
3. Self-propel paddle
4. Start button
5. Telescopic handle
6. Isolator key
7. Handle lock lever
8. Battery door
9. In-use battery compartment
10. Storage battery compartment
11. Grass catcher
12. Quick-release fastener
13. Cutting height adjustment lever
14. Rear wheel
15. Operator's manual
16. Front wheel
17. Mulching plug
18. Battery pack
19. Charger
SYMBOLS ON THE PRODUCT
Read and understand
all instructions before
operating the product. Follow
all warnings and safety
instructions.
Wear ear protection.
Wear eye protection.
Do not operate the product on
inclines greater than 15°. Mow
across the face of slopes,
never up and down.
Do not expose the product to
rain or damp conditions.
Beware of sharp blades.
Blades continue to rotate after
the motor is turned off .
Remove the isolator key
before maintenance.
Beware of thrown or fl ying
objects. Keep all bystanders,
especially children and pets,
at least 15 m away from the
operating area.
European Conformity Mark
7
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR