Idiomas disponibles
Idiomas disponibles
Intended use
GB
• This appliance is intended to be used for commercial appli-
cations, for example in kitchens of restaurants, canteens,
hospitals and in commercial enterprises such as bakeries,
butcheries, etc., but not for continuous mass production of
food.
• The appliance is designed blending and mixing food. Any
other use may lead to damage to the appliance or personal
injury.
• Operating the appliance for any other purpose shall be
deemed as a misuse of the device. The user shall be solely
liable for improper use of the device.
Grounding installation
This appliance is classified as protection class I and must be
connected to a protective ground. Grounding reduces the risk
of electric shock by providing an escape wire for the electric
current.
This appliance is fitted with a power cord with grounding plug
or electrical connections with grounding wire. The connec-
tions must be properly installed and grounded.
Main parts of the product
(Fig.1 on page 3)
1. Transparent cap
2. Lid
3. Pusher
4. Jar handle
5. Jar
6. Cutting unit
7. Control panel
8. Motor unit
Note: Grey marked parts are food contact approved.
Remark: The content of this manual applies for all listed
items unless specified otherwise. The appearance may vary
from the shown illustrations.
Control panel
(Fig.2 on page 4)
9. Speed dial
10. Power-button
11. Pulse-button
Circuit diagram
(Fig.3 on page 4)
12. Over load protection
13. Variable switch
14. On/Off
15. Sensitive switch
16. Speed knob
17. Pulse switch
18. Motor
19. Earth
10
Exploded diagram with part list
(Fig.4 on page 5)
Part
Part name
no.
1
Small Lid
2
Cover set
3
Pusher
4
2.5L jar set
5
Knife set
6
Seal Ring
7
Fixed Plate
8
M4*6 Screw
9
Rotor
10
Base of 2.5L Jar
11
Body
12
Pulse Switch
13
On/Off Switch
14
Control Panel
15
Knob
16
Potentiometer
17
Warning Label
18
Shock protection for the motor
19
95*40 Motor
20
PCB Board
21
Bottom Cover
22
Plastic Feet
23
Air Deflector
24
Plate of Air Deflector
25
Power Cord
26
Over-Load Protection
27
Microswitch
28
Base of Microswitch
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
