Bosch Rexroth 3842 559 921 Manual De Instrucciones página 58

22/36 Operation
9.3.2 Setting the height of the application
The hand switch display shows the lifting height and not the actual height of
the application.
1. Move the lifting modules to the lower end position and measure the height of
the application
2. Set this value in the control unit:
Button / display
or
P12
Button [1]
or
P33
Button [1]
or
Button [1]
Button [2]
9.3.3 Determining the upper and lower stroke limitation
Button / display
or
or
P06
P07
Button [1]
Between upper and lower user height, there must be a minimum
distance so that the table is still able to move after the setting.
From FD 2021-09
• Maintain a minimum distance of 50 mm – is monitored.
• The safety area moves with the lower stroke limitation,
see sections 5.1.1 "Safety area" and
9.3.8 "Change safety area [from FD 2021-09]"
Bosch Rexroth AG, MPS: Steuergerät, 3 842 564 712/2022-06
Instructions
Push shortly four times in a row – call menu
Push to select a menu item
Service menu
Push to confi rm menu item
The display shows "P30"
Push to select a menu item
Adjusting the table height
Push to confi rm menu item
The display now shows the currently set height
Push to set the measured height
Push to save the selection
Push to exit the menu
Instructions
Move table to desired height
Call menu
Push to select a menu item
Lower stroke limitation
Upper stroke limitation
Push to confi rm menu item