Receiving
When the RSM is connected to the radio accessory
connector, the radio speaker is muted, and the audio is
only heard from the RSM speaker. Similarly, when a
secondary receiver audio accessory is plugged into the 3.5
mm audio jack (PMMN4015), audio to the RSM is rerouted
to the secondary accessory.
Transmitting
To transmit using your RSM:
1. Press and hold the Push-To-Talk (PTT) button on the
RSM.
2. Speak into the RSM.
3. Release the PTT when finished.
Note: Connecting the RSM to the radio does not disable the radio
microphone and PTT.
REMOVING THE RSM
Turn the radio off before removing the RSM from the radio.
Remember to reattach the radio accessory connector seal
to the side of the radio when an accessory is not being
used.
USING THE ORANGE EMERGENCY BUTTON
The orange button on the RSM remotely activates the
same function that is programmed for the radio orange
button. Your radio user guide contains a full description of
the emergency mode and other programmable functions
that are available through these buttons.
Note: 1. The RSM Emergency button does not turn radio on as
does the radio emergency button.
2. The RSM orange button does not exit emergency mode.
Use radio control to exit emergency mode.
4