Idiomas disponibles
Idiomas disponibles
5.3 Powering the antenna using an external power
supply unit (Fig. 2c)
• Connect the coaxial cable of the antenna to the antenna
input on the digital TV or set-top box.
• Connect the USB cable to the antenna and to a suitable USB
power supply unit (not included) and plug the latter into a
socket.
• Switch on the antenna by turning the knob (4) clockwise.
The LED (3) lights up.
• Switch on the digital TV (and the set-top box, if present).
5.4 TV reception
• For perfect reception, extend both telescopes (6) fully.
• Position the antenna for the best possible reception.
Depending on horizontal or vertical polarisation in the VHF/
UHF band, both the ring dipole (5) and the telescopes (6)
can be adjusted.
• Depending on the station, the ampli er performance must
be adjusted using the knob (4).
Note
Please note that the number and quality of stations received
may vary depending on the position of the antenna and
local conditions.
5.5 Radio reception:
• The antenna can also be used for DAB reception.
• As most audio devices have an F-plug connection, please
use a coax socket-F socket adapter (not included).
Note
Please note that the number and quality of stations received
may vary depending on the position of the antenna and
local conditions.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and
do not use aggressive cleaning agents.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the
radio equipment type [00221082] is in compliance
with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet
address:
https://uk.hama.com
00221082
Downloads
3
