First Time Usage; Hard Disk Formatting; Main Screen; Setup Menu - Sveon SPremiere Serie Manual De Usuario

9. First time usage

Please read carefully the following before using the device for first time:
- Install the remote control batteries (provided with the unit)
- Connect the device to your TV screen (read the section 8 of the user guide)
- Connect the power adaptor to the power outlet and also to the unit
- Press the power switch to select "On" option
Note: Please pay special attention to the choosing of output resolution. The device supports up to 1080p of resolution, but
your TV screen may not be compliant. If you choose a 1080p of output resolution in the device and your TV screen doesn´t
support it, the screen will not display any image. In that case, you should press the arrow buttons right and left to change
the output resolution; if the TV still doesn´t display pictures, connect the device through AV output and select the correct
output resolution (1080i if your screen is not Full HD).
On the top of the unit you can find buttons for basic operations to move the highlight, during the options and play multi-
media files easily:
- Pressing the buttons 5 6 you can move up or down the highlight in the device menus
- Pressing the buttons 34 you can access to the folders
- Pressing OK button you can confirm a selection, a file or a folder
- Pressing STOP button you can stop a playback

9.1 Hard disk formatting

The inner hard disk installed on your SPM1200HD is formatted by default. If you want to format it again, follow these steps:
- Press "Menu" button of the remote control or select this option in the Main screen. Then, select "Format" option, select
the inner hard disk and, then, select the file system (you can choose between FAT32 or NTFS).
- We strongly recommend format the hard disk in NTFS format to allow the playback of big-size files.
- If you want to format the hard disk, please note it must be in a supported file system: NTFS or FAT32.
- Please note that if you format the inner hard disk, all the files saved will be deleted.

9.2 Main screen

This is the first menu which is displayed when the device is connected:
Pictures: Direct access to the available picture files
Music: Direct access to the available music files
Film: Direct access to the available video files
Menu: Direct access to the setup menu of the device
Explore: Direct access to explore all the available files
DVB-T: Direct access to the DVB-T tuner
Recording: Direct access to the saved recordings
Important
1. Do not cover the unit, even if you are not using it
2. Do not place the device in irregular surfaces.
3. Place the unit in a well ventilated place.
4. The power adaptor gets hot during its usage (up to 30-40º). This heating is normal.

10. Setup Menu

In this menu you will be able to setup the preferences of the unit. Press "OK" button to choose between the different op-
tions. Press "Exit" to go back to the previous menu.
This menu includes the following options:
10.1 System
Choose this section to setup the device options.
SPM1200HD User Guide
Index
1. Welcome
1.1 Safety instructions
2. Features
3. System Requirements
4. Content
5. Hardware
6. Remote control
6.1 Batteries installation
7. PC Connection
8. TV Connections
8.1 AV Connection
8.2 HDMI Connection
8.3 Antenna Connection
9. First time usage
9.1 Hard disk formatting
9.2 Main screen
10. Setup Menu
10.1 System
10.2 Film
10.3 Pictures
10.4 Format
11. Basic operations
11.1 Pictures playback
11.2 Music playback
11.3 Video playback
11.4 Explore
11.5 DVB-T
11.6 Recording
12. Channel Scan
12.1 Auto channel scan
12.2 Manual channel scan
13. TV Main Menu
13.1 Program Menu
13.2 Channel scan
13.3 Time
13.4 Options
13.5 System
13.6 Recording menu
14. Sort channels
14.1 Skip channels
14.2 Lock channels
14.3 Delete channels
14.4 Favourite list
14.5 Rename
15. Shedule and direct recording
16. TimeShift recording
17. Radio
18. Watching TV channels
19. Info
20. Teletext
21. Multimedia
22. Default Setup
23. Upgrade System
24. Warning
APPENDIX: Files information
English 30