Idiomas disponibles
Idiomas disponibles
Button
Function
Volume down
Volume -
Previous media
source
5. USB-C charging port: Insert the USB-C plug here to recharge the battery.
6. Lights On/Off button: Press this button to turn the lights on or off, and to cycle
through the lighting patterns.
a. Press this button briefly to turn ON the lights on the headphones logo.
b. Press it twice to have a solid lighting pattern (PULSE MODE) beating at the
sound of the music.
c. Press this button for a third time and the lighting pattern will change colors
(white, red, blue, green, purple, yellow and teal) in five-second intervals.
d. Setting the lighting color: Press this button for about 3 seconds to cycle
through the different colors, stop on the color you want and this will be the
color the logo will stay ON and the color of the running effect.
e. Setting brightness level: Press this button to switch the intensity of the lights
from full to half brightness. Turning the lights to a lower intensity level will help
to save battery life.
Operation instruction
Press and hold this button to decrease the
audio level of the headphones.
Press this button briefly to play the
Previous track.
7. 3.5mm auxiliary input jack: Use it for wired playback.
8. LED indicator light:
The LED turns red when the headphones are being charged.
The LED will blink blue and red alternatively when the headphones are in pairing
mode.
The LED will blink alternatively blue when the headphones are in BT mode.
III. Basic operation
Charging your headphones
• Plug one end of the supplied USB-C cable to your headphones USB-C port and
the other end into the USB port of your computer or to a 5VDC 500mA USB
adapter to fully charge the battery*.
• The headphones battery has to be initially charged for at least 3 hours. Thereafter,
the battery will take about 2 hours to recharge.
• Make sure that the headphones are fully charged before using them for the first
time.
• When battery is low it will emit a low battery prompt, to remind you to recharge
the headphones.
*Do not use a USB fast charging or PD adapters with an output power greater than 5V or you
will damage your headphones and void the warranty.
