Advanced Operation - KlipXtreme BluBudz KHS-629 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

VI. Basic operation
Charge your headset
Plug the supplied USB cable into the USB
port of your computer or to a 5V USB
adapter to charge the battery.
Connect the micro-USB end of the cable into
the charging port of the headset.
Make sure that your headset is fully charged
before using it for the first time.
The headset battery has to be initially charged
for 1 to 2 hours. Thereafter, the battery will
take around 1 hour to recharge.
While the headset is being charged, the LED
glows red. The status light turns off once it
has reached full capacity.
Turning your headset on and off
Slide the switch to its "on" position to
1.
power on the earphones.
To power off the device, simply slide the
2.
switch back to the "off" to disconnect the
device.
The device vibrates every time it is turned
3.
on and off.
The auto shut-off feature disconnects the
4.
device after a period of inactivity. Slide the
switch off and then back on to reconnect it.
V. Advanced operation
Note: Before installing this product, please
make sure your device has the built-in
Bluetooth® feature available.
Pairing the earphones with
your mobile device
Place both devices not more than one
1.
meter away from each other.
Set your Bluetooth® phone to "discover" the
2.
wireless headset.
Upon turning on the headset, the blue and
3.
red LEDs will start blinking alternately
accompanied by a vibration alert on the left
side, to indicate that it has entered into the
pairing mode.
Follow the set up process of your own
4.
mobile device, in which case, upon
discovering the wireless headset (KHS-629),
it will ask if you want to pair with it.
Accept by pressing Yes or Ok on the
5.
phone. If you have a lower Bluetooth®
version, you may be prompted to enter the
passkey 0000 (4 zeros).
If pairing is successful, the device will vibrate
6.
again, making the LED indicator change to a
slow blinking blue light.
Tabla de contenido
loading

Tabla de contenido