Basic Operation - KlipXtreme LiteTouch KTE-005 Manual De Instrucciones

1 Magnetic charging case: Place each earbud
in the corresponding left and right side to
recharge. The earbuds will turn on,
synchronize and enter into pairing mode as
soon as they are taken out of the charging
case.
2 Charging case LED indicator: It blinks
consecutively in white indicating that the
device is being charged. The light will stop
blinking and stay solid white once it is fully
charged.
3 Charging port: Insert the Micro USB cable
in this port to charge the battery.
4 Earbuds with On/Off-Multifunction soft
button: Touch this soft button for power,
music and phone call management.
5 Earbuds LED indicator
Status
Charging The LED turns solid red
Charging The LED turns off
complete
Power On The earphones will blink blue momentarily as
they sync with each other automatically and
then will enter into mobile pairing mode.
Power Off The LED lights flash red, then turns off.
Pairing mode The LED on one of the earphones will
active randomly blink blue, while the other one will
blink red and blue, alternatively.
® Only the blue LED will blink once every 5
Bluetooth
wireless pairing seconds in both earphones.
Low battery A voice message will be heard indicating the
battery level is low.
Incoming call/ Blue LED lights up once every 5 seconds
Dialing
Phone is on Blue LED lights up once every 5 seconds
active call

3. Basic operation

3.1. Charging the case and earphones
1. To charge the case, plug the supplied USB
cable into a power source and the
micro-USB end in the case's port. The case
starts charging automatically.
2. Charging the case battery to its full capacity
may take about 1.5 hour.
Function