GYS NOMAD POWER PRO TRUCK Manual De Instrucciones página 10

Translation of the original instructions
Connection / disconnection:
• Disconnect the power supply before connecting/disconnecting
Class III device (NOMAD POWER).
Entretien :
• The power supply cable cannot be replaced. If the cable is
• Service should be performed by a qualified person
• Warning! Always remove the power plug from the wall socket
• Under no circumstances should solvents or other aggressive
• Clean the device's surfaces with a soft, dry cloth.
Regulations
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The British
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on our
Disposal:
• This product should be disposed of at an appropriate
• The battery must be removed from the device before the latter
• The device must absolutely be disconnected from the power
10
NOMAD POWER PRO TRUCK
the device to/from the battery.
damaged,the device should not be used (NOMAD POWER
charger).
before carrying out any work on the device.
cleaning agents be used.
Declaration of Conformity is available on our website (see
home page).
website (see cover page).
recycling facility. Do not dispose of in domestic waste.
is discarded.
supply network before removing the battery.
EN