Idiomas disponibles
Idiomas disponibles
WHEEL REMOVAL
Refer to the Safety Precautions on page 47.
Front Wheel Removal
1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Loosen the axle holder nuts (1) and
remove the font axle holder (2).
3. Unscrew the axle (3). Remove the wheel.
Do not depress the brake lever when the
wheel is of f the motorcycle. The caliper
pistons will be forced out of the cylinders
with subsequent loss of brake fluid. If this
occurs servicing of the brake system will be
necessary. See your Honda dealer for this
ser vice.
76
(1)
(2)
(3)
(1) Axle holder nuts
(2) Axle holder
(3) Front axle
(1)
