Idiomas disponibles
Idiomas disponibles
Charging a High Capacity or Ultra High Capacity Battery
The followings are the procedures to convert the charger from the default set up
to accommodate to the high capacity and ultra high capacity mode:
1.
Squeeze both tabs on each side of the removable bracket in the drop-in
charger tray and lift the bracket from the charger tray.
2.
Rotate the removable bracket 180 degrees and replace it by fitting it in the
charger slot until it snaps. The label on the removable bracket should
show "High & Ultra Capacity Battery" facing the front of the charger.
Repeat same procedure to return the position back to charging a
standard battery. Label on the removable bracket should show "Standard
Battery" facing front.
Note: Make sure the bracket is assembled correctly for both standalone battery
and battery with radio to be properly charged.
Removable
Piece
Removable
Piece
6
Turn around
horizontal
180 degree
