Idiomas disponibles
Idiomas disponibles
Replacing the cutting blade
(see figs. E + F)
NOTE
►
Before carrying out any work on the
appliance, ensure that the rotation direction
is in the middle. This prevents
switch
unintentional switching on.
♦
Start by connecting the cutting attachment
to the appliance. This blocks the motor spindle
and allows the screw to be removed.
♦
Unscrew the screw (I).
♦
Remove the cutting blade (II) by pulling it
downwards.
♦
Push in a new cutting blade (II) from below
ensuring that the ground edge of the blade
faces you.
Turn around the blade (II) until it fits onto the
tool fitting (III).
♦
Tighten the screw (I).
♦
The attachment can now be used again.
CAUTION!
►
There is an arrow ( ) on the blade guard
of the cutting attachment. This shows you
the recommended running direction of the
cutting blade.
■
44
│ GB│MT
Operation
Switching the cordless screwdriver
on/off
Switching on:
♦
To start the appliance, press the ON/OFF
switch
and keep it pressed in.
Switching off:
♦
Release the ON/OFF switch
appliance.
Changing the direction of rotation
Clockwise:
♦
Push the rotation direction switch
♦
Press the ON/OFF switch
rotation indicator
screw in the screws.
Anti-clockwise:
♦
Push the rotation direction switch
♦
Press the ON/OFF switch
rotation indicator
unscrew the screws.
Safety lock-out:
♦
Push the rotation direction switch
middle position. The ON/OFF switch
blocked.
NOTE
►
When the ON/OFF switch
still possible to activate the LED lamps
To do this, press the ON/OFF switch
Tips and tricks
Screw bits are labelled according to their dimen-
sions and their shape. If you are unsure, always try
the particular screw bit out to see whether it sits in
the screw head without any free play.
to switch off the
to the left.
. The clockwise
lights up. You can now
to the right.
. The anticlockwise
lights up. You can now
into the
is
is locked it is
.
.
PAS 4 A1
