Idiomas disponibles
Idiomas disponibles
Trigger Lock
(Fig . 16, 17)
The Trigger Lock 3 is designed to prevent unin-
tended trigger activation .
To Unlock the Trigger:
Fully press the Trigger Lock 3 on the unlock sym-
bol side to unlock the Trigger 2 (Fig . 16) .
To Lock the Trigger:
Release the Trigger 2, and fully press the Trigger
Lock 3 on the lock symbol side to lock the Trigger
2 (Fig . 17) .
Built-in Work Light
(Fig . 1)
Your nailer is equipped with an LED Work Light
13 for better visibility when using the nailer .
The LED will stay on for 10 seconds after the
Trigger 2 is pressed .
Depth of Drive Adjustment
(Fig . 18)
The depth to which fasteners are driven into the
work piece can be adjusted using the Depth Set-
ting Switch 10 on the front of the nailer .
Slide the Depth Setting Switch 10 to the left to
increase the drive depth, as seen in (Fig . 18) .
Slide the Depth Setting Switch 10 to the right to
reduce drive depth, as seen in (Fig . 18) .
1605A001CD GNB18V-12 202301.indd 21
page heading
Operation
Fig. 16
2
3
Fig. 17
Fig. 18
10
2
3
21
1/9/23 2:07 PM
