Idiomas disponibles
Idiomas disponibles
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such hazards as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such hazards as personal injury and/or property damage.
Before assembling the vacuum cleaner, check the PACKING LIST (page 3). Use this list to
verify that you have received all the components of your new Kenmore Vacuum Cleaner.
WARNING
Electrical Shock Hazard.
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or injury.
To reduce the risk of electric shock, do
not expose to rain.
NOTE:
A Phillips head screwdriver is
required.
1. Undo the latches.
2. Lift the powerhead off the collection
tank.
3. Remove the contents from inside the
collection tank; make sure you have all
contents as listed on page 9.
ASSEMBLY INSTRUCTIONS
- 10 -
4. Insert the casters and wheels into the
respective sockets on the bottom of the
base. Apply pressure until casters and
wheels snap into place.
5. Turn the collection tank upside down
and fit the base assembly onto the tank.
Secure the base to the tank with the
supplied four small screws. Verify that
the base is assembled correctly. Do not
over-tighten screws.
