Pioneer DEH-1770 Manual De Operación página 3

Idiomas disponibles

Idiomas disponibles

Before You Start
About this unit
The tuner frequencies on this unit are allo-
cated for use in Central or South America. Use
in other areas may result in poor reception.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
CAUTION
! Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
! Keep this manual handy as a reference for op-
erating procedures and precautions.
! Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
! Protect this unit from moisture.
! If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
! If this unit does not operate properly, contact
your dealer or nearest authorized Pioneer Ser-
vice Station.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
All manuals and user guides at all-guides.com
! Never use force or grip the display and the
! Avoid subjecting the front panel to excessive
! Keep the front panel out of direct sunlight and
Removing the front panel
1
panel.
Press DETACH and the right side of the panel
is released from the head unit.
2
Grab the right side of the front panel and pull
away to the left. The front panel will be de-
tached from the head unit.
3
case provided for safe keeping.
Attaching the front panel
1
head unit.
2
the head unit until it is firmly seated.
Important
buttons too tightly when removing or attach-
ing.
shocks.
high temperatures.
Press DETACH to release the front
Grab the front panel and remove.
Put the front panel into the protective
Place the front panel flat against the
Press the front panel into the face of
Section
01
3
En
loading