Customizing The Equalizer Curve; Adjusting Setup Items - Set - Sony MEX-BT3600U Manual De Instrucciones

Customizing the equalizer curve

— EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press the select
button repeatedly to select "EQ3."
2 Rotate the volume control dial to
select "CUSTOM."
3
Press the select button repeatedly
until "LOW," "MID" or "HI" appears.
4
Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 3 and 4 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to select the
setting (example "ON" or "OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
CLOCK-ADJ (Clock Adjust) (page 6)
BEEP
To set "BEEP-ON" (
18
) or "BEEP-OFF."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "RM NORM" ( ): to use the rotary
z
commander in the factory-set position.
– "RM REV": when you mount the rotary
commander on the right side of the steering
column.
AUX-A* 1 (AUX Audio)
To turn the AUX source display "AUX-A-ON"
( ) or "AUX-A-OFF" (page 19).
z
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off.
– "A.OFF-NO" ( ), "A.OFF-30S (Seconds),"
z
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
B.OUT (Black Out)
To turn off the illumination automatically for
any source (for example, during CD playback/
radio reception, etc.).
– "B.OUT-ON"* 2 : to turn off the illumination if
no operation is performed for 5 seconds.
– "B.OUT-OFF" ( ): to deactivate the Black Out
z
function.
To bring the light back on, press any button.
DEMO (Demonstration)
To set "DEMO-ON" (
z
DIM (Dimmer)
To change the brightness of the display.
– "DIM-ON": to dim the display.
– "DIM-OFF" ( ): to deactivate the dimmer.
z
A.SCRL*
3 (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
– "A.SCRL-ON" ( ): to scroll.
z
– "A.SCRL-OFF": to not scroll.
LOCAL (Local Seek Mode)
– "LOCAL-ON": to only tune into stations with
stronger signals.
– "LOCAL-OFF" ( ): to tune normal reception.
z
MONO* 4 (Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
– "MONO-ON": to hear stereo broadcast in
monaural.
– "MONO-OFF" ( ): to hear stereo broadcast in
z
stereo.
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "LPF
OFF" ( ), "LPF125Hz" or "LPF 78Hz."
z
) or "DEMO-OFF."