Craftsman 580.752342 Instrucciones De Uso página 5

KNOW YOUR PRESSURE WASHER
i]_i - ---i Read the Operator's Manual and safety rules before operating your pressure washer.
] Compare the illustrations with your pressure washer to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
Spry
Nozzle Extension with Quick Connect
Accessory Tray
Recoil Starter
Air Filter
Primer Bulb
Throttle Le ve_--_-"---...
Fuel Tank
Turbo Nozzle
ProjectPro
TM
Nozzles
High Pressure Hose
Oil Fill/Dipstick
High Pressure
Outlet & Water Inlet
Detergent Injection
Siphon/Filter
Pump equipped with
Automatic Cool Down System
Accessory Tray -- Provides convenient storage for
accessories, such as brushes, turbo wands, etc.
Air Filter -- Protects engine by filtering dust and
debris out of intake air.
Automatic Cool Down System -- Cycles water
through pump when water reaches 125°-155°F. Warm
water will discharge from pump onto ground. This
system prevents internal pump damage.
Data Tag (not shown, near rear of base plate) -
Provides model and serial number of pressure
washer. Please have these readily available if calling
for assistance.
Detergent injection Siphon/Filter- Use to siphon
detergent or other pressure washer detergents into the
low pressure stream.
Fuel Tank -- Fill tank with regular unleaded fuel.
Always leave room for fuel expansion.
High Pressure Hose -- Connect one end to water
pump and the other end to spray gun.
High Pressure Outlet -- Connection for high
pressure hose.
Nozzle Extension with Quick Connect -- Allows you
to switch between four different nozzles.
Oil Fill/Dipstick -- Check and fill with oil here.
Primer Bulb -- Prepares a cold engine for starting.
ProjectPro
TM
Nozzles -- Detergent, Max, General,
and Delicate nozzles: for various pressure cleaning
applications.
Pump- Develops high pressure.
Recoil Starter -- Used for starting the engine
manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
Throttle Lever -- Sets engine in starting mode for
recoil starter and stops a running engine.
Turbo Nozzle -- Rotates a high pressure stream in a
rapid circular pattern.
Water inlet -- Connection for garden hose.